SEMI-ELLIPTICAL DUMP BODY

KH6833 Dumpbody

Features

BODY TYPESemi-Elliptical,Cross-Memberless,Tub Style Box

STANDARD LENGTHS: 14’-19’Lengths Available(in 6”Increments)

STANDARD SIDE HEIGHTS: 30”-60”Heights Available (in 6”Increments)

STANDARD WIDTH96”OD87”ID

CAPACITIES: Ut22+ Cubic Yards

STANDARD CONSTRUCTION:1/4”AR-400 Floor,Sides,andFronWall

BODY FRAME: 8”Steel Channel with Horizontal Braces

TOP RAILS: Tubular Steel Mounted on Diamond for Dirt Shedding

HOIST:  Inboard-Doghouse Mountor OutboarBailMount, 4-Stage Telescopic Hoist Cylinders

PTO AND PUMP: Direct MounPTO and Hydraulic PumpAir Controlled PTO with Air or Cable Operated Hoist Pump

TAILGATE: 1/4”AR-400 Facing with Formed 10GA Steel Box ReinforcingStandard Swing or Air Operated High Lift Activation

LATCHES: Cab Controlled Air OperatedPositive LatchingTSE Air Cans(1100 PSI OLatch Force) with Greaseable Pinson All Gate Hardware

FENDERS: 10 Ga Steel Over Drive Axles Standard

BODY HINGE: Heavy DutyP-200 Greaseable Rear Hinge Assembly

CAB GUARD: Standard1/4CabGuard WeldedtoFront Wall

SPREADER APRON: 1/4”AR-400,10”Long Full Width of Body with Spreader Chains Hidden Under Apron

LIGHTS: Truck Lite LED Lights

SAFETY PROP: Mounted Drivers Side and Self Aligning

OPTIONAL BED EQUIPMENT

BODY:   Optional3 /16” AR-400/450/500 Material Available

SUB-FRAME: 3”x4” Steel Mounting Sub-Frame when Applicable

FENDER OPTIONS: Full Body Length Weld-on Fenders,Bolt-on Aluminum Fenders, Bolt-on Stainless Steel Fenders

SIDE BOARDS: Wood,Formed Steel,Formed Aluminum,Formed Stainless

TARPS: Manual Pull TarSystems, Electric TarSystems with Steel or Aluminum Arms

HITCHES: Steel Weld-on Hitch Plates with Pintle HitchesAir and Electric Run to the Rear Available for Trucks with Trailer Air Packages Previously Installed, Electric Brake Controllers Available

ASPHAULT CHUTES: Ut(3) Chutes Available in Tailgate

FOLD UP MUDFLAPS: Cab Controlled Air Operated Foldup Mudflaps with or without Tailights

CUSTOM PAINT:  Many Colors Available

CONTRACTOR SERIES DUMP BODY

K&H Contractor

CONTRACTOR SERIES DUMP BODY FEATURES:

10' X 30' SQUARE DUMP BODY 5-6 YARD CAPACITY 10' LONG WITH 30" SIDES 8" CHANNEL LONG SILLS CROSS MEMBER-LESS BODY 3/16" 100,000 YIELD T-1 STEEL FLOOR 10 GA A-36 STEEL SIDES THAT ARE ONE PIECE WITH FULL LENGTH FORMED HORIZONTAL REINFORCEMENT 3" X 3" TOP RAILS MOUNTED ON DIAMOND FOR DIRT SHEDDING TAPERED BOTTOM RUB RAILS FOR DIRT SHEDDING 3/16" HIGH TENSILE REAR POSTS STANDARD DOG-HOUSE HOIST (84" STROKE CYL) STANDARD SWING DOUBLE ACTING TAILGATE (MANUAL LATCH) STANDARD 1/2 CAB-GUARD (SHIPPED LOOSE) LIGHTS AND REFLECTORS TO DOT REQUIREMENTS WIRING HARNESS FOR LIGHTS IS INCLUDED IN KIT BODY UP SAFETY PROP (SHIPPED LOOSE) ALL NECESSARY MOUNTING HARDWARE BODY IS PREPPED AND PRIMED

SIMPLE 16 Body

K&H Simple 16

ROCK TUB BODY

K&H Rock Tub-1

Contact Us - Find Out More

Your Name (required)

Your Email (required)

Subject

Your Message

TOP